Inflatable Tent Guide

How to Setup Your Canopy Tent

Step 1: Remove the X tent form the carry bag and unfold the frame.

Step 2: Make sure the canopy is above and the legs are below.

Step 3: Each leg have 1 inflate / deflate valve and 1 overpressure valve. Tighten the valves.

Step 4: Insert the electric pummp into the opened inflate /deflate valve and inflating these four legs separately. Inflate until the tube feels very solid. The remaining air will escape through the overpressure valve.

Step 5: Drive 8 stakes into the ground at an angle of 40 degrees. When you cannot use stakes on solid ground, you can buckle 4 water barrels to the 4 legs.

 

Tips for Inflatable Tents

1.when you or your client use the tent, make sure valves and over pressure valves are not dropped out from the holes of the tube fabric, please reset them with the Velcro.

2.when you inflate the tent, please make sure the space is big enough for the tent and stretch the frame as flat as possible (make sure the tube is not twisting) do not let anything sharp object to puncture the tent. even better if you can put a mat on the floor to protect the tent from abrasion with the floor.

3.when you setup the tent outside, please use sand bags , stakes, and rope to well anchoring the tents, the large tents can not used without ropes and stakes

 

Warrantly Info

1. We supply one year warrantly.

2. If it is the products itself 100% problem, we supply free parts and free delivery
3. If we use for some time, and with some small problems, we can check if we can supply some free parts or give some discount. For the shipping cost, the clients need to pay it by themselves.
4. If we use for a long time,  and the products some parts damaged very seriousness. You can take some photos to us, and we will send to our professional QC team to check if we can choose to change some parts only, then to reduce the replacing cost. For the products parts and shipping cost, the clients need to pay it by themselves.